服务热线: 400-117-8816
           13406879330

剪螺栓专用扳手,扭剪扳手价格,扭剪扳手厂家,扭剪必威西汉姆联官网g1线路,扭剪型必威西汉姆联官网g1线路,扭剪枪的研发与生产

当前位置:首页>新闻中心>扭力扳手扭力范围是什么?

扭力扳手扭力范围是什么?

来源: 日期:2022-09-23 发布人:wanzhong

扭矩扳手的更小扭矩范围为5N.m,扭矩范围为225N.m.液压扭矩扳手3360注意事项液压扳手的扭矩不是从0开始,也是由液压扳手泵决定的。因为液压扳手泵是二级泵还是三级泵,无论是齿轮泵还是柱塞泵,在压力低流量大的时候,溢流大,压力不稳定,扳手的输出扭矩也不稳定。扭矩的精确测量从第二阶段开始。第二级流量比低压流量小得多。

The minimum torque range of the torque wrench is 5N. m, and the maximum torque range is 225N. m. Hydraulic torque wrench 3360 Precautions The torque of the hydraulic wrench does not start from 0, but is also determined by the hydraulic wrench pump. Because the hydraulic wrench pump is a two-stage pump or a three-stage pump, whether it is a gear pump or a plunger pump, when the pressure is low and the flow is large, the overflow is large, the pressure is unstable, and the output torque of the wrench is unstable. The accurate measurement of torque starts from the second stage. The second stage flow is much smaller than the low pressure flow.
没有溢流和稳定性,可以精确控制扭矩。使用扭矩扳手3360时的注意事项不要使用预设的扭矩扳手来拆卸螺栓或螺母。禁止将套筒延伸臂安装在扭矩扳手的端部,以防损坏扭矩扳手。根据需要调节所需扭矩,使用前确保调节机构已锁定。
No overflow and stability, torque can be accurately controlled. Precautions when using the torque wrench 3360 Do not use the preset torque wrench to remove the bolt or nut. Do not install the socket extension arm on the end of the torque wrench to prevent damage to the torque wrench. Adjust the required torque as required and ensure that the adjusting mechanism is locked before use.
以上就是为大家介绍的有关扭剪螺栓专用扳手的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务
The above is a detailed introduction to the special wrench for torsional shear bolts. I hope it will be helpful to you. If you have any questions, please contact us. We will provide you with professional services